Adhere to the standards set forth in AISC Design Guide 15
Reference data for wrought iron and steel shapes that have been discontinued
beginning with shapes produced in 1873. AISC Design Guide 15 provides a historical review of the ASTM material standards beginning in 1900 and of AISC specifications from 1923 forward. It describes how existing structural systems can be enhanced for increased strength and stiffness. AISC Search Utility for Structural Steel
Shapes 3.1 is included with this Design Guide.
AISC Design Guide 15: AISC Rehabilitation and Retrofit Guide: A Reference for Historic Shapes and Specifications, 2002 Edition
- Table of Contents:
- Author
- Preface
- Acknowledgements
- Historical Review of Specifications
- Structural Shapes and Plates
- Steel Pipe and Hollow Structural Sections
- Hot-Driven Rivets
- Structural Bolts
- Carbon Steel Bolts
- High Strength Steel Bolts
- Structural Welding
- Properties of Beam and Column Sections 1873-2000
- Steel Sections 1971-2000
- Steel Sections 1953-1970
- Steel Sections 1887-1952
- Wrought Iron Sections 1873–1900
- Evaluation of Existing Structures
- Introduction
- Evaluation Methods
- Gravity Loads
- Seismic Loads
- N,AISC LRFD Specification
- Specification Provisions
- Commentary
- Enhancement of Existing Structural Systems
- Gravity Systems
- Floors
- Columns
- Lateral Systems
- Fully Restrained Moment Frames
- Partially Restrained Moment Frames
- Concentrically Braced Frames
- Eccentric Braced Frames
- Connections
- Connection Types
- Typical Methods of Reinforcement
- Rehab of Seismic Moment Connections
- Welding to Existing Members
- Thermal Cutting of Existing Members
- Drilling Holes in Existing Members
- References on Rehabilitation and Retrofit
- Reference List
- Summaries of References
- General Retrofit
- Retrofit Case Studies
- Seismic Retrofit
- Appendix
- Historical Review of Specifications and Manual
- A1 AISC Specifications – 1923 to 1999
- A2 AISC Manual – 1927 to 1995
- A3 Specifications for High-Strength Bolted Joints – 1951 to 2000
- A4 Design Specifications for Structural Welding – 1934 to 1999309
- A5 AISC Code of Standard Practice – 1924 to 2000
- Index
|
