Reduce hazards when transporting dangerous substances on marine vessels!
NFPA 306 specifies safety requirements for vessels carrying or burning
as fuel flammable or combustible liquids. It also applies to vessels carrying or
having carried flammable compressed gases, chemicals in bulk, or other products
capable of creating a hazardous condition. The document describes the conditions
required before a space can be entered or work can be started on any vessel
under construction, alteration, or repair or on any vessel awaiting ship breaking.
NFPA 306 provides the standard of practice that NFPA-certificated Marine
Chemists must follow in carrying out their duties where required by regulations
of the U.S. Department of Labor -- OSHA, and U.S. Coast Guard. Approx. 23 pp.
The 2003 edition incorporates the following changes:
- The scope was clarified to indicate that the primary focus for this
Standard and the Marine Chemist is the atmospheric hazards associated with
entry and work in confined and enclosed spaces aboard vessels undergoing
construction, repair or alteration.
- A new definition for hot work has been included that better correlates
with the definition used by OSHA for the same term.
- The frequency of testing requirements were revised to more closely match
those defined by OSHA in its shipyard regulations. These revisions better
correlate with common industry practices and the OSHA requirements for the
Shipyard Competent Person.
NFPA 306: Standard for the Control of Gas Hazards on Vessels, 2003 Edition - Table of Contents:
- Administration
- Referenced Publications
- Definitions
- Minimum Requirements for Issuance of Marine Chemist's Certificate and Maintenance Conditions
- Preparing Vessels for Issuance of a Marine Chemists Certificate Involving Hot Work
- Vessels Required to Have Marine Chemist's Certificate
- Additional Requirements for Bulk Chemical Cargo Tanks
- Additional Requirements for Flammable Cryogenic Liquid Carriers
- Annex A Explanatory Material
- Annex B Examples of Safe Conditions
- Annex C Sample Marine Chemists Certificate
- Annex D Guidance to Vessel Owners and Operators When Hot Work and/or Enclosed/Confined Space Entry Is Conducted on a Vessel at Sea and a Marine Chemist Is Not Required