These Specifications for Structural Concrete are in metric format.
This specification is a Reference Specification that the engineer or architect can make applicable to any construction project by citing it in the Project Specification. The document covers materials and proportioning of concrete; reinforcing and prestressing steels; production, placing, finishing, and curing of concrete; and formwork design and construction. Methods of treatment of joints and embedded items, repair of surface defects, and finishing of formed and unformed surfaces are specified. Separate sections are devoted to architectural concrete, lightweight concrete, mass concrete, prestressed concrete, and shrinkage-compensating concrete. Provisions governing testing, evaluation, and acceptance of concrete as well as acceptance of the structure are included. 49 pp.
ACI 301-99: Specifications for Structural Concrete - Metric - Table of Contents:
- Foreword
- Section 1 - General Requirements
- Scope
- Work specified
- Work not specified
- Definitions
- Standards producing organizations
- References standards and cited publications
- Reference standards
- Cited publications
- Field references
- Submittals
- General
- Testing agency reports
- Quality Assurance
- General
- Testing agencies
- Testing responsibilities of contractor
- Testing responsibilities of owner's testing agency
- Tests in hardened concrete in-place
- Evaluation of concrete strength
- Acceptance of concrete strength
- Field acceptance of concrete
- Acceptance of Structure
- General
- Dimensional tolerances
- Appearance
- Strength of structure
- Durability
- Protection of In-Place Concrete
- Loading and support of concrete
- Protection from mechanical injury
- Section 2 - Formwork and Formwork Accessories
- General
- Description
- Submittals
- Products
- Materials
- Performance and design requirements
- Fabrication and manufacture
- Execution
- Construction and erection of formwork
- Removal of formwork
- Reshoring
- Strength of concrete required for removal of formwork
- Field quality control
- Section 3 - Reinforcement and Reinforcement Supports
- General
- Submittals, data and drawings
- Materials delivery, storage and handling
- Products
- Materials
- Fabrication
- Execution
- Preparation
- Placement
- Section 4 - Concrete Mixtures
- General
- Description
- Submittals
- Quality control
- Materials storage and handling
- Products
- Materials
- Performance and design requirements
- Proportioning
- Execution
- Measuring, batching and mixing
- Delivery
- Section 5 - Handling, Placing, and Constructing
- General
- Description
- Submittals
- Delivery, storage and handling
- Products
- Materials
- Submittals
- Performance and design requirements
- Execution
- Preparation
- Placement of concrete
- Finishing formed surfaces
- Finishing unformed surfaces
- Sawed contraction joints
- Curing and protection
- Repair and surface defects
- Section 6 - Architectural Concrete
- General
- Description
- Submittals
- Quality assurance
- Product delivery, storage and handling
- Project conditions
- Products
- Materials
- Performance and design requirements
- Execution
- Preparation
- Proportioning concrete mixtures
- Consolidation
- Formwork monitoring
- Formwork removal
- Repair of tie holes and surface defects
- Finishing
- Section 7 - Lightweight Concrete
- General
- Description
- Submittals
- Products
- Aggregates
- Performance and design requirements
- Mixtures
- Batching and mixing
- Execution
- Consolidation
- Finishing
- Field quality control
- Section 8 - Mass Concrete
- General
- Description
- Submittals
- Products
- Materials
- Performance and design requirements
- Execution
- Placement
- Curing and protection
- Section 9 - Prestressed Concrete
- General
- Description
- Submittals
- Quality control
- Product delivery, handling and storage
- Products
- Materials
- Proportioning of concrete and grout mixtures
- Execution
- Inspection
- Preparation
- Placement
- Tensioning and other operations involving tendons
- Section 10 - Shrinkage-Compensating Concrete
- General
- Scope
- General requirements
- Submittals
- Products
- Materials
- Performance and design requirements
- Proportioning
- Reinforcement
- Isolation-joint filler materials
- Execution
- Reinforcement
- Placing
- Isolation joints
- Curing
- Notes to Specifiers
|
