Scan through solid concrete up to 6" deep.
Features & Applications:
Graphically pinpoint the exact location and the type of a material. Find rebar, metal pipe, conduit, metal studs, junction boxes, and metal framing before you begin drilling. No more needless holes, costly broken drill bits and saw blades. The large, graphic LCD displays proximity, type of metal and depth of metal.
Differentiate between materials based on their magnetic properties-to a depth rounded up to the nearest 1/2 inch. Find steel rebar and copper pipe up to 6 inches within solid concrete.
Features:
- Locates metal up to 6 inches deep
- Finds all types of metal
- Identifies magnetic vs. nonmagnetic
- Indicates depth of metal found
- Large LCD screen
- Tough for jobsite use
Applications:
Find rebar, metal pipes, conduit, and plumbing before:
- Drilling into slabs for anchor bolts
- Coring through floors for wire bundles
- Cutting openings in concrete walls
- Drilling to add rebar to slab joints
- Estimating a demolition job
- Find nails in used lumber before sawing,
planing or sanding
Detailed Specs:
| Dimensions |
8.87 L x 3.84 W x 2.23 in. D
(251 x 109 x 63 mm) |
| Weight |
10.1 oz. (286 g) without battery |
| Battery type |
9-V alkaline (not included) |
| Position accuracy |
Center of #4 (1/2 in.) rebar or 1/2 in. (13 mm) copper
pipe at a minimum
grid spacing of 6 in. (152 mm) typically within 1/2
in. (13 mm) |
| Depth |
Up to 6 in. +/- 1 in. (152 mm +/- 25 mm) |
| Operating temperature |
20 to 120°F (-7 to 49°C) |
| Storage temperature |
-20 to 150°F (-29 to 66°C) |
| Humidity |
80% RH (noncondensing) |
| Water resistance |
Splash and water resistant, not waterproof |
|
