The Georgia Residential-Light Contractor Reference Book Set Includes:

Georgia State Licensing Board for Residential and General Contractors, Contractors Guide to Business, Law and Project Management, 1st Edition:

This book is organized into three sections.

Part 1 focuses on planning and starting your business. This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills.

Part 2 Covers fundamentals you will need to know in order to operate a successful construction business. This section covers estimating, contract management, scheduling, project management, safety and environmental responsibilities, and building good relationships with employees, subcontractors, and customers.

Part 3 provides valuable information to assist you in running the administrative functions of your business. Financial management, tax basics, and lien laws are covered. Effective management of these areas of business is vital and can cause you serious problems if you do not give them proper attention.

2006 ICC International Building Code (IBC) - Looseleaf:

The 2006 International Building Code addresses the design and installation of building systems through requirements that emphasize performance. Fully compatible with all the International Codes, the 2006 Edition provides up-to-date, comprehensive coverage that establishes minimum regulations for building systems using prescriptive- and performance-related provisions. Content is founded on broad-based principles that make possible the use of materials and building designs. Structural as well as fire- and life-safety provisions covering seismic, wind, accessibility, egress, occupancy, roofs, and more are included. 680 pp.

The scope of this code covers all buildings except 3-story one- and two-family dwellings and town homes.

2006 ICC International Residential Code (IRC) - One and Two-Family Dwellings - Looseleaf:

The 2006 International Residential Code brings uniformity to construction of one- and two-family dwellings and townhouses up to three stories high. A comprehensive code for homebuilding, this book brings together all building, plumbing, mechanical, and electrical provisions for one- and two-family residences. It establishes minimum regulations using prescriptive provisions, and is founded on broad-based principles that make possible the use of new materials and building designs. This 2006 edition is fully compatible with all the International Codes published by the International Code Council (ICC). 684 pp.

OSHA Standards for the Construction Industry 2009, 29 CFR Part 1926 Revised as of January:

This book contains the occupational safety and health standards for the construction industry promulgated by the Occupational Safety and Health Administration (OSHA), effective January 2009. Although this is not an official OSHA publication, it reproduces the full text of regulations contained in the official OSHA government version at Title 29 of the Code of Federal Regulations (CFR) Part 1926.

Also includes:

• Full text of the long-awaited & proposed rule on crane and derrick safety hazards
• 1903 regulations on inspections, citations, and proposed penalties
• 1904 regulations covering occupational injury and illness record-keeping and reporting
• 1990 carcinogen policy and model standards
• Entire text of the Occupational Safety and Health Act of 1970, including §5(a) (the "General Duty" clause)

Carpentry & Building Construction, 2004, 6th Edition:

Carpentry & Building Construction is a comprehensive carpentry textbook with a focus on residential construction, with many of the same procedures applying to light commercial construction. 976 pp.

Features:

• Full-color with up-to-date drawings and photographs
  
• Offers detailed, heavily illustrated information about materials, tools and processes, with many step-by-step procedures
  
• Totally reorganized with new content on tools, engineered lumber, engineered panel products , steel framing, mechanicals, decks and porches
  
• Covers entire construction process from planning, estimating and scheduling to the finishing touches such as painting and floor coverings

WTCA Building Component Safety Information BCSI, 2008 Edition:

The 2008 edition of BCSI consists of ten chapters that have been updated to include the most current information regarding the handling, installing, restraining and bracing of metal plate connected wood trusses. New to this edition are information and guidance pertaining to: diagonal bracing for web members with two rows of lateral restraint and permanent lateral restraint and diagonal bracing guidance for trusses spaced wider than 2' on center. Design responsibility information and structural building component terminology have also been updated to match the 2007 edition of ANSI/TPI 1. This version of BCSI is the standard 8.5" by 11" size, coil-bound and three-hole punched.

The Contractor's Guide to Quality Concrete Construction:

The Contractor's Guide to Quality Concrete Construction is written by and for those who order, form, place, consolidate, finish, and cure concrete. Designers also will find the practical approach of the Contractor's Guide valuable in developing their project specifications.

The purpose of the Contractor's Guide is to provide insight into proven construction practices which, when properly used, will produce quality concrete construction. It can be used as a training manual for contractor personnel as well as a basic reference manual for field and office.

Throughout this book are practical contractor tips that will be especially helpful in preparing for a project and as a guide during construction.

Modern Masonry - Brick, Block and Stone, 2003:

Modern Masonry provides a thorough grounding in safe methods of laying brick, block, and stone, as well as a broad understanding of materials and their properties. Simply and clearly written, the text covers the important aspects of the masonry trade including tools and equipment; safety; the makeup, properties, uses, and sizes of every type of masonry unit; accepted techniques for laying all kinds of masonry units in all kinds of bonds; construction details for masonry walls, foundations, pavement, steps, garden walls, and masonry arches; and over 75 procedures for laying brick, block, and stone. 384 pp.

The Instructor's Manual (#281-9644-03) provides answers to questions in the text and job practice manual (#281-9636-03)

Features

• Provides information on the newest materials and building techniques used in the industry, as well as the latest standards.
• Covers entire masonry systems such as walls, floors, and foundations.
• Full color throughout with numerous illustrations to enhance student understanding.
• Material is organized into functional units closely aligned with the needs of an apprenticeship training program, community college program, or other instruction.
• Reference section of more than 30 useful charts and drawings.
• Offers step-by-step procedures for masonry techniques.
• Includes end of chapter review questions.

Pipe & Excavation Contracting:

Pipe & Excavation Contracting shows how to read plans and compute quantities for both trench and surface excavation, figure crew and equipment productivity rates, estimate unit costs, bid the work, and get the bonds you need. Explains what equipment will deliver maximum productivity for a job, how to lay all types of water and sewer pipe, and how to switch your business to excavation work when you don't have pipe contracts. Covers asphalt and rock removal, working on steep slopes or in high groundwater, and how to avoid the pitfalls that can wipe out your profits on any job. 400 pp.

Gypsum Construction Handbook, Centennial Edition 2000:

This guide is highly recommended for its timesaving, lower-cost methods of installation. Provides a thorough coverage of proficient construction procedures for gypsum, drywall, veneer plaster, cement board, and conventional plaster construction.

A constant companion to architects, engineers, contractors, builders and dealers, journeymen, building inspectors, and code officials to simplify construction using the newest developments in products and systems. 528 pp.

Handling and Erection of Steel Joists and Joist Girders, 2nd Edition:

Handling and Erection of Steel Joists and Joist Girders contains a thorough coverage of handling and erection procedures, including definitions of the various products, and a description of the preparing, tagging and loading of the joists at the manufacturer's plant. It also contains sections dealing with attachments to the joists, inspection and repair at the job site. 67 pp.

2006 ICC International Energy Conservation Code (IECC) - Paperback:

Encourages energy conservation through efficiency in envelope design, mechanical systems, lighting systems and the use of new materials and techniques.

The 2006 International Energy Conservation Code is designed to provide up-to-date energy conservation provisions for residential and commercial buildings. It addresses building envelope requirements for thermal performance and air leakage, as well as the installation of energy efficient mechanical, lighting, and power systems. The model code regulations found in this book help result in the optimal utilization of fossil fuel and non-depletable resources in all communities. 36 pp.