1. Scope
1.1 This specification covers the installation and erection requirements for
load bearing (transverse and axial) steel studs and related accessories 0.0329
in. (0.836 mm) to 0.1120 in. (2.845 mm) thick.
1.2 Values stated in inch-pound units are to be regarded as the standard. The
SI (metric) values given in parentheses are approximate and are provided for
information purposes only.
1.3 The text of this standard references notes and footnotes that provide
explanatory material. These notes and footnotes (excluding those in tables and
figures) shall not be considered as requirements of the standard.
2. Referenced Documents
C954
Specification for Steel Drill Screws for the Application of Gypsum Panel
Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112
in. (2.84 mm) in Thickness
C955
Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners
(Track), and Bracing or Bridging for Screw Application of Gypsum Panel Products
and Metal Plaster Bases
C841
Specification for Installation of Interior Lathing and Furring
C11
Terminology Relating to Gypsum and Related Building Materials and Systems
C1063
Specification for Installation of Lathing and Furring to Receive Interior and
Exterior Portland Cement-Based Plaster
Cold-Formed Steel Design Manual: Specifications for the Design of Cold-Formed
Steel Structural Members, 1986 Revision and 1989 addendum
FF-P-395 Pin, Drive, Guided and Pin Drive, Power Actuated Fasteners for Power
Actuated and Hand Actuated Fastening Tools
MIL-P-21035 Paint, High Zinc Dust Content, Galvanizing Repair
D1.3 Specification for Welding Sheet Steel in Structures
ASTM C1007-04 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
